PW LADDER TRAY BLIND END PLATE M T G* Seals off the open end of a cable tray. Attaches to the tray using standard 3/8 " dia. connector fasteners. PRODUCT NUMBER 0402 Height/Material FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Width Fasteners 4T - 0402 - 12 - G E CABLE DROPOUT M T G* Provides a smooth, rounded surface for cables dropping out of the bottom of the cable tray. PRODUCT NUMBER 0253 0254 FASTENER OPTIONS Material -Flange CATALOG NUMBERING EXAMPLE: Width Fasteners M I- 0253-06 - S 6 TRAY WIDTH (NOMINAL) DROPOUT WIDTH (FLG IN) DROPOUT WIDTH (FLG OUT) 6 21/4 51/4 9 51/4 81/4 12 81/4 113/4 18 141/4 173/4 24 201/4 233/4 30 261/4 293/4 36 321/4 353/4 IN R 3/4 5 ZN S6 WALL PENETRATION SLEEVE M G T Provides a rigid support for cable tray at wall penetrations. Overall length of the sleeve is 20 " . Will fit walls up to 8 " thick. Bonding jumpers are not required for use with wall sleeves. Two pairs of splice plates and fasteners are included for tray attachment. SERIES1 (S1) SERIES2 (S2) PRODUCT NUMBER 0424 Connector System No FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Width Fasteners 4 T 2 - 0424 -12- S 6 PRODUCT NUMBER 0434 Connector System No FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Width Fasteners 4 G 2 - 0434 -06- G E OUTDOOR CONVERSION KIT FOR WALL PENETRATION G T Makes ladder tray wall penetrations weather resistant to minimize water intrusions. Removable cover/shield fastens to tray and wall penetration sleeve for weather protection. SERIES1 (S1) SERIES2 (S2) * Fits Standard Hot-Dip Galvanized or Stainless " 0424 " or " 0440 " wall penetrations (see page B.62, B.68.) * Sized to fit flange-in or flange-out trays The wall penetration sleeve and outdoor conversion kit are designed to fit Series 1 and 2 systems. When ordering, however, they should be specified as Series 2. B.62 G* = optional WWW.LEGRAND.US/CABLOFIL METALLIC ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL