PW LADDER TRAY I-BEAM HOLD DOWN CLAMP/ EXPANSION GUIDE Z T Hold Down Clamp firmly attaches the cable tray to the flange of an I-beam type support by using all three provided screws. Expansion Guide attaches the clamp to the flange of an I-beam type support, allowing movement of the tray side rail due to thermal contraction and expansion by using only the 1-1/2 " long screw on the bottom of the clamp. PRODUCT NUMBER A802-01* FASTENER OPTIONS GE S6 CATALOG NUMBERING EXAMPLE: Accessory System No.Fasteners Z - A 802-01 - G E *Includes (2) ½ " x 5 (1) ½ " x 1 ½ " screw. * Heavy duty cast iron construction /8 " screws and SINGLE OVERHEAD HANGER CLAMP M Attaches to the tray bottom flange and supports the cable tray directly from a threaded rod without the need for an additional support member. Threaded rod purchased separately. SERIES1 (S1) PRODUCT NUMBER 1899-01 1899-02 Material ROD DIA. 1/2 3/8 " " FASTENERS INCLUDED ZN S6 CATALOG NUMBERING EXAMPLE: Fasteners M - 1899-01 -S6 HANGER BRACKETS M T G* SINGLE: Supports a single tray side rail from a 1/2 " threaded rod. For use with all flange-out ladder tray systems. Safe load = 300 lbs. per bracket. PRODUCT NUMBER SINGLE A836 CATALOG NUMBERING EXAMPLE: Accessory System No. Fasteners 4 M2 - A 836 FASTENER OPTIONS NONE NYLON ISOLATION PAD N Made of extruded black nylon. Can be installed between the cable tray and support member to provide electrical isolation of the tray system. Can also be used to facilitate cable tray movement caused by thermal contraction and expansion. No fasteners required. PRODUCT NUMBER 8945 DIMENSIONS 1/8 CATALOG NUMBERING EXAMPLE: Material N - 8945 " X 3 " X 6 " B.64 G* = optional WWW.LEGRAND.US/CABLOFIL METALLIC ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL