PW LADDER TRAY 20 " FIRE WALL PENETRATION SLEEVE M G T Fixed collar is welded to sleeve Fabricated cable tray fire stop sleeves from Legrand, combined with Firestop products, are an economical alternative to the high cost of fabricating protective fire wall and floor penetration sleeves in the field. This firestop system provides a rigid support for cable tray in a UL classified system approved for fire wall and floor penetrations. After the sleeve is placed in the wall or floor, the loose collar slides over it. Hardware for the tray connection only is included. Hardware required to mount sleeves to the wall or floor is not included. Loose collar slides over sleeve after it is placed in the wall Cable trays are attached to both ends of the sleeve using standard splice plate connectors W*+6 " PRODUCT NUMBER 0440 SIDE VIEW 20 " Wall Assembly (Gypsum Wall Shown) Cables AdjustableCollar Hilti Fire Blocks Penetration Sleeve Cables Fixed collar is welded to sleeve Cable trays are attached to both ends of the sleeve using standard splice plate connectors Adjustable Collar Fixed Collar Wall Anchors (Not Included) END VIEW W*+6 " 7/16 " diameter holes for 3/8 " hardware (not included) H*+6 " Loose collar slides over sleeve after it is placed in the wall FASTENER OPTIONS GE S6 W*=Nominal Tray Width H*=Tray Side Rail Height The Fire Block is a compressible fire stop brick, well-suited for installations where frequent cable changes may be required. Blocks are easily cut to fit any space, and can be removed and reinstalled when cable configurations change. When exposed to fire, the blocks expand to lock the seal in place. 7/16 " diameter holes for 3/8 " hardware (not included) H*+6 " Each cable tray firestop sleeve includes: * One penetration sleeve with flanges * Fire Blocks * One Firestop Putty Stick / Sealant * Hardware for cable tray connection to the wall sleeve: Hilti Fire Blocks - Metallic and fiberglass cable trays with two side rails. The Firestop kit includes two pairs of splice plates with nuts & bolts; 316 stainless steel is recommended for use with fiberglass systems. Fixed Collar Floor Assembly SLEEVE WIDTH Penetration Sleeve 6 9 12 18 24 30 36 W*=Nominal Tray Width H*=Tray Side Rail Height OUTDOOR CONVERSION FOR WALL PENETRATION (0434) See page 62. Hilti Fire Blocks all Assembly ypsum Wall Shown) Cables djustableCollar Fixed Collar Penetration Sleeve Floor Assembly UL classified for use with: 2-hr concrete or block walls 2-hr concrete floors 1-hr gypsum walls 2-hr gypsum walls NUMBER OF FIRE BLOCKS INCLUDED WITH EACH SLEEVE SIDE RAIL HEIGHT (IN.) Masonry Anchors (Not Included) 4 2 3 3 5 6 8 9 5 2 3 4 6 8 10 12 6 3 4 5 7 9 12 14 7 3 4 6 8 11 14 16 Adjustable Collar l Anchors t Included) Masonry Anchors (Not Included) Penetration Sleeve B.68 * Wall Penetration Sleeves (0424 or 0440) are purchased seperately from the outdoor conversion kit (0434). WWW.LEGRAND.US/CABLOFIL METALLIC FIRESTOP SYSTEMShttp://WWW.LEGRAND.US/CABLOFIL