PW LADDER TRAY FLAT COVER Covers are highly recommended to avoid damage to the tray contents and to protect against the elements. Flat covers are available for both straight sections and fittings. Covers are made from fire-retardant polyester resin per ASTM E84 Class 1, light gray color. Standard cover thickness is 1/8 " and length is 10'-0 " . Side rail height is necessary for outside vertical fitting covers. Please contact Legrand for more information. LENGTH (FT.) COVER 10 SYSTEM NUMBER 7130 COMPLETE CATALOG NUMBER DS-8935-PL DRIVE RIVET Only for use with indoor, horizontal covers. Drive rivets are the most economical method of cover attachment. Requires field drilling. Install on 24 " centers. FLAT COVER CLAMP For use with indoor, outdoor, or vertical flat covers. The 1400 cover clamp is 1 " wide fiberglass. Install one clamp over each cover joint and 36 " -48 " spacing between joints. CHANNEL-STYLE APPLICATION F PRODUCT NUMBER CHANNEL 1400 CATALOG NUMBERING EXAMPLE: System No. 6F I- 1400 -24- S 6 FASTENERS INCLUDED S6 Width Fasteners FIBERGLASS FLAT COVER CATALOG NUMBERING EXAMPLE: 7130 - 0010 - 36 LENGTH OR PRODUCT FITTING NO. B.76 WIDTHS (W) INCHES 6 9 12 18 24 30 36 RAIL HEIGHTS (H) INCHES 4 6 LENGTH (L) FEET 10 TRAY SYSTEM NUMBER 4F 6F FI FIBERGLASS PREFIX OPTIONS 4 " Side Rail 6 " Side Rail Flange In WWW.LEGRAND.US/CABLOFIL This identifies the specific tray design and is used as a product number prefix for straight sections. LENGTH 0010 - 10' or 9112 FITTING PRODUCT NO. This identifies fitting type and radius WIDTH 06 - 6 " 09 - 9 " 12 - 12 " 18 - 18 " 24 - 24 " 30 - 30 " 36 - 36 " FIBERGLASS COVER & ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL