PW LADDER TRAY BLIND END PLATE F Seals off the open end of a cable tray. Attaches to the tray using standard 3/8 " dia. connector hardware. RAIL HEIGHTS (H) INCHES 4 6 CABLE DROPOUT T Provides a smooth, rounded surface for cables dropping out of the bottom of the cable tray. PRODUCT NUMBER 0402 FASTENERS S6 CATALOG NUMBERING EXAMPLE: System No. Width Fasteners 6F I- 0402 -12- S 6 DIVIDER STRIPS Straight strips are for use with all straight ladder tray; flexible strips are for use with all horizontal fittings of any radius. Field-drilled holes are required for installation of all divider strips. Thermoplastic drive rivets, required for installation, should be purchased separately. RAIL HEIGHTS (H) INCHES 4 6 STRAIGHT HORIZONTAL DIVIDER TYPE VERTICAL 90° INSIDE ELBOW VERTICAL 90° OUTSIDE ELBOW FLEXIBLE HORIZONTAL DIVIDER VERTICAL 45° INSIDE ELBOW VERTICAL 45° OUTSIDE ELBOW VERTICAL FITTING DIVIDER VERTICAL 30° INSIDE ELBOW VERTICAL 30° OUTSIDE ELBOW PRODUCT NUMBER 9112-99 9124-99 9136-99 9212-99 9224-99 9236-99 4612-99 4624-99 4636-99 4712-99 4724-99 4736-99 3112-99 3124-99 3136-99 3212-99 3224-99 3236-99 CATALOG NUMBERING EXAMPLE: System No. 6F- 0010-99 B.78 WWW.LEGRAND.US/CABLOFIL RADIUS 12 24 36 12 24 36 12 24 36 12 24 36 12 24 36 12 24 36 TYPE SEALANT Sealant STRAIGHT HORIZONTAL TYPE FLEXIBLE HORIZONTAL 0010-99 PRODUCT NUMBER 0606-99 PRODUCT NUMBER F LENGTH (FT) 10 LENGTH (FT) 6 Used to reseal fiberglass after field modifications. Available in quart and gallon sizes. Includes two brushes. SIZE QUART GALLON CATALOG NO. 0941-Q 0941-G 4F 6F FI FIBERGLASS PREFIX OPTIONS 4 " Side Rail 6 " Side Rail Flange In THERMOPLASTIC DRIVE RIVETS REQUIRED Straight Divider Fitting Dividers 4 3 RADIUS 5 PRODUCT NUMBER 0254 CATALOG NUMBERING EXAMPLE: System No. Width Fasteners T I - 0254 -24- S 6 THERMOPLASTIC DRIVE RIVET COMPLETE CATALOG NO. DS-8935-01-PL FASTENERS S6 FIELD CUTTING SEALANT FIBERGLASS ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL