PW LADDER TRAY CABLE DROPOUT Provides a smooth surface for cables to drop out of runway with a 3 " radius bend. PROTECTIVE END CAP Protects the exposed ends of runway side rails. Plastic material. Sold in pairs. PRODUCT NUMBER 0254 PRODUCT NUMBER 0410 CATALOG NUMBERING EXAMPLE: System No. W Fasteners Coating R - 0254 - 06- Z N - B K CATALOG NUMBERING EXAMPLE: System No. 1R - 0410 CABLE RETAINING POSTS L-BRACKET Posts add load depth to cable runway. Includes one post, one bracket, and one end cap. Posts are typically installed on 12 " centers. H* HEIGHTS (H) INCHES 4 6 8 PRODUCT NUMBER A330 System No. FASTENERS INCLUDED ZN CATALOG NUMBERING EXAMPLE: H Fasteners Coating 1R- A 330 -08- Z N - B K 0.25 WALL ANGLE SUPPORT KIT Supports cable runway against wall or upright vertical surface. Angle length and hole spacing is based on the specified width. Kit includes hardware for tray attachment, but wall attachment hardware is not included. Standard finish is black epoxy powder coat. APPLICATION WALL BRACKET Supports cable runway against the wall or an upright vertical surface. Hardware for runway attachment is included. Standard finish is black epoxy powder coat. PRODUCT NUMBER 0349 System No. FASTENERS INCLUDED ZN CATALOG NUMBERING EXAMPLE: W Fasteners Coating R - 0349 -09- Z N - B K PRODUCT NUMBER FASTENERS INCLUDED 0403 ZN CATALOG NUMBERING EXAMPLE: System No. B.84 WWW.LEGRAND.US/CABLOFIL W Fasteners Coating R-0403 - 0 6 - ZN - BK 4.75 Bracket provides a separate facility for running power conductors or other cables that should be physically separated from main cables. 4.24 PRODUCT NUMBER A834 System No. FASTENERS INCLUDED ZN CATALOG NUMBERING EXAMPLE: Fasteners Coating 1R - A 834 -Z N-B K CABLE RUNWAY SPLICES, CONNECTORS & ACCESSORIEShttp://WWW.LEGRAND.US/CABLOFIL