PW LADDER TRAY SSP STANDARD SPLICE A This splice slides into built-in channels on the outside of straight sections of tray and features 2 sets of mounting holes. The larger hole accepts aluminum push-pin fasteners that allow assembly without tools. The smaller set of holes accepts traditional bolted fasteners available in Geomet and 316L Stainless Steel. Splices are sold separately. Patent Number - 11,002,384 HASP HORIZONTAL ADJUSTABLE SPLICE Adjusts to any horizontal angle needed. A FASTENERS INCLUDED GE S6 PP FASTENERS INCLUDED CATALOG NUMBERING EXAMPLE: C C- 4A-S S P-G E TRAY TYPE CC - Cable Channel MATERIAL A WIDTH 4 " 6 " PRODUCT TYPE SSP - Splice HARDWARE TYPE GE - Geomet S6 - 316L Stainless PP - Push Pin GE S6 CATALOG NUMBERING EXAMPLE: C C- 4A-H A S P-G E TRAY TYPE CC - Cable Channel MATERIAL A WIDTH 4 " 6 " PRODUCT TYPE HASP -Horizontal Adjustable Splice HARDWARE TYPE GE - Geomet S6 - 316L Stainless VASP VERTICAL ADJUSTABLE SPLICE A Adjusts to any vertical angle needed. RSP CHANNEL REDUCER SPLICE Fold up tab blocks open section of tray. A FASTENERS INCLUDED GE S6 PP FASTENERS INCLUDED CATALOG NUMBERING EXAMPLE: C C- 4A-V A S P-P P TRAY TYPE CC - Cable Channel MATERIAL A WIDTH 4 " 6 " PRODUCT TYPE VASP -Vertical Adjustable Splice HARDWARE TYPE GE - Geomet S6 - 316L Stainless PP - Push Pin GE S6 PP CATALOG NUMBERING EXAMPLE: C C- 4 6A-R S P-P P TRAY TYPE CC - Cable Channel MATERIAL A PRODUCT TYPE RSP -Channel Reducer Splice HARDWARE TYPE GE - Geomet S6 - 316L Stainless PP - Push Pin Bonding jumpers are required when using push-pins. B.97 For detailed material and finish descriptions, see page B.6. WWW.LEGRAND.US/CABLOFIL CHANNEL CONNECTORS AND SPLICEShttp://WWW.LEGRAND.US/CABLOFIL