WIREMOLD / OPEN SPACE CCBB SERIES™ BALLROOM FLOOR BOXES CCBB Series Floor Boxes Steel Sectional Device Plate Installation Information Multi-Gang Mounting Brackets Used with Sectional Device Plates Cat. No. RFB119-SPACER Used to close gap on outside sectional device plate Existing opening when not covered with Cat. No. RFB119-SPACER RFB119-SPACER (6) 1-Gang Sectional Plates 1 13/16 " x 4 1/2 " (46mm x 114mm) CCBB Series Floor Boxes Steel Sectional Device Plates Ordering Information RFB119-SB, RFB119-2SB, RFB119-3SB Blank Device Plate One-, two- and three-gang device plates in standard widths. RFB119-SB RFB119-2SB RFB119-3SB RFB119-SSR1 RFB119-SSR2 RFB119-SSR1, RFB119-SSR2 Single Receptacle Device Plate Single-gang device plates in sectional widths. SSR1 has an opening of 1.39 " (35.31mm) and SSR2 has an opening of 1.59 " (40.39mm). RFB119-SGFI GFI Receptacle Device Plate Single-gang sectional (SGFI) width device plate. RFB119-AAP Device Plate Two-gang sectional device plate. Holds three (3) Extron® Electronics AAP devices. RFB119-SD Duplex Receptacle Device Plate Single-gang sectional (SD) width device plate. RFB119-SKO Combination 1/2 " and 3/4 " Trade Size Knockout Device Plate Available in sectional (SKO) width. NOTE: Sectional device plates allow for custom configuration of a multigang plate that conforms to the standard NEMA 1.812 " (1 13/16 " ) (46.02mm) center-to-center spacing. 106 WWW.LEGRAND.US/WIREMOLD FLOOR BOXEShttp://WWW.LEGRAND.US/WIREMOLD