WIREMOLD / OPEN SPACE CRFB SERIES™ Mounting plates on this page can be installed in the shaded location indicated in this illustration. FLOOR BOXES CRFB2 Series Floor Box Device Plates Ordering Information 8AT Center Mount Device Plate Mounting Locations 8S1 1 3/8 " (35mm) Device Plate Receptacle opening 1 3/8 " (35mm). Accepts most 15A and 20A straight blade receptacles and 15A Turnlok receptacles. NOTE: Device plates are not included with the CRFB2 Series Floor Box housing and must be purchased separately. 8B Blank Device Plate Single gang device plate used to blank off either of the compartments, when no devices are used. 8DP Duplex Device Plate Single- gang device plate that accepts standard 20A duplex receptacle, a duplex Turnlok receptacle, fits in either of the compartments. Devices supplied by others. 8DEC GFCI/Decorator Device Plate Single-gang device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. Fits in either of the compartments. Devices supplied by others. 8ACT6A Communication Device Plate 8MAAP AVIP Device Plate Single-gang device plate that will accept up to six (6) ports of communication devices. Fits in either of the compartments. Devices supplied by others. 8MOS Mosaic Device Plate Device plate accepts three (3) standard Mosaic devices (45mm x 22.5mm). Devices supplied by others. NOTE: Not designed to accept adorne style devices. 8AAP AAP Device Plate Two-gang device plate that will accept up to four (4) Extron Electronics AAP style plates. 8AAP takes up both of the compartments. Devices supplied by others. 144 WWW.LEGRAND.US/WIREMOLD Single-gang device plate that will accept up to four (4) Legrand AVIP or Extron Electronics MAAP style plates. Fits in either of the compartments. Devices supplied by others. Single-gang device plate that will accept up to six (6) Ortronics TracJack devices. Fits in either of the compartments. Devices supplied by others. NOTE: When using 8TRAC or 8SER, remove side communications plug to avoid interference. 8SER Ortronics Series II Device Plate Single-gang device plate that will accept up to three (3) Ortronics Series II dual modular inserts. Fits in either of the compartments. Devices supplied by others. NOTE: When using 8TRAC or 8SER, remove side communications plug to avoid interference. 8S2 1 9/16 " (40mm) Device Plate Receptacle opening 1 9/16 " (40mm). Accepts 20A Turnlok receptacles. 8TRAC Ortronics TracJack Device Plate FLOOR BOXEShttp://WWW.LEGRAND.US/WIREMOLD