WIREMOLD / OPEN SPACE FIRE CLASSIFIED FLOOR BOXES Evolution™ Series Fire Classified Floor Boxes Evolution™ Series 6-Gang Fire Classified Floor Boxes Ordering Information EFB6S-FC2222 6-Gang Fire Classified Floor Box 11 3/16 " 15 1/8 " (384mm) 4 1/4 " (108mm) (284mm) Pre-assembled installation-ready floor box has been designed to be installed in above-grade concrete floors while maintaining the fire classification of the floor. This box is classified to be used in 1-, 1 1/2-, 2-, or 3-hour fire rated floors. Designed to accept standard size wall plates. Box comes complete with all components needed for initial installation. NOTES: Designed for new construction applications. 21 3/4 " 17 1/4 " (438mm) Components Included: * Protective/Disposable Cover * Tunnel System connects the two modules of compartments * Fire Classified Pan * Two (2) Modules - Back Box (1 per module) - Device Mounting Brackets (1 per module) - Removable Repositionable Divider (1 per module) * Four (4) 2 " (61mm) Intumescent Conduit Feeds * Two (2) Cable Management Guides Evolution Series Fire Classified 6-Gang Floor Box Accessories Ordering Information EFB6-MB Mounting Bracket EFB-MAAP Device Plate Holds up to three (3) devices of power, communications or audio/ video devices. Bracket accepts standard size (2 3/4 " x 4 1/2 " (70mm x 114mm)) device plates sold separately by others. EFB-AAP Device Plate Holds 2 Extron Electronics AAP devices. Device plate dimensions: 2 3/4 " x 4 1/2 " (69mm x 114mm). Holds 4 Legrand AVIP or Extron Electronics MAAP devices. Device plate dimensions: 2 3/4 " x 4 1/2 " (69mm x 114mm). (552mm) Consult structural engineer before making cuts into decking. Add additional supports as instructed by the structural engineer. When used on bare (polished) concrete or terrazzo floors EFB610-CTR must be used. (Sold separately.) 3 7/8 " (98mm) Depth Behind Device Plate Fire Classified Pan (Insures 3 1/4 " (83mm) of concrete around box at all times) Items not included with the box and sold separately: * Receptacles * Communication Jacks * A/V Devices * Device plates Four (4 2 " (51mm) intumescent Service Feeds EFB-MOS Device Plate European device plate accepts up to (45mm x 67.5mm) Arteor device. Device plate dimensions: 2 3/4 " x 4 1/2 " (69mm x 114mm). NOTE: Not designed for use with adorne® devices. 164 WWW.LEGRAND.US/WIREMOLD FLOOR BOXEShttp://WWW.LEGRAND.US/WIREMOLD