WIREMOLD / OPEN SPACE EVOLUTION™ 4AT SERIES POKE-THRU DEVICES Evolution Series 4 " Poke-Thru Devices Ordering Information Recessed Unwired Surface Style Poke-Thru Assembly * Designed to be installed in concrete floors * Accessibility to ceiling space below floor is required to feed power, data and A/V services * Installs into a 4 " (102mm) to a 4 1/8 " (105mm) diameter hole * Unit comes complete with surface style cover and two (2) empty gangs that are recessed 3 3/4 " (95mm) below floor surface level * Surface style cover is aluminum and is designed to sit on top of finished floor surfaces, including: carpet, tile, wood, polished concrete or terrazzo * Covers are available in three powder coat finishes: black (BK), gray (GY), bronze (BZ); and three durable brushed finishes: satin brass (SB) satin nickel (SN), and brushed aluminum (AA). INCLUDED Devices & Device Plates: * No device plates included Bottom Feed: * One (1) 3/4 " trade size conduit stub * One (1) 1 1/2 " trade size conduit stub 5 1/2 " (139mm) 18 9/16 " (471mm) PART NUMBERS: 4ATCBK (Black) 4ATCGY (Gray) 4ATCBZ (Bronze) 4ATCSB (Satin Brass) 4ATCSN (Satin Nickel) 4ATCAA (Brushed Aluminum) NOTE: UL Fire Classified for up to 2-hour rated floors. NOTE: Receptacles can be wired as a standard or isolated ground device. 3 13/16 " (97mm) 2 13/16 " (72mm) 2 7/16 " (62mm) 18 9/16 " (471mm) Bottom View 8° Bevel 3/16 " (4.8mm) Top View Surface Style Cover * Closure plate included to seal 1 1/2 " trade size conduit stub. ** Includes junction box attached to the 3/4 " trade size conduit. NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document. WWW.LEGRAND.US/WIREMOLD 195 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD