WIREMOLD / OPEN SPACE EVOLUTION™ 6AT SERIES POKE-THRU DEVICES Evolution Series 6 " Poke-Thru Devices Ordering Information (continued) Recessed Prewired Flush Style Poke-Thru Assembly Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services. The poke-Thru device installs into a 6 " (152mm) to a 6 1/8 " (156mm) diameter hole. The unit comes complete with a flush-style cover and two (2) prewired, pre-installed duplex receptacles that are recessed 4 " (102mm) below the floor surface level. The flush style cover is an aluminum cover that is designed to sit flush with the finished floor covering such as: carpet, tile, or wood and is available in three powder coat finishes: black (BK), gray (GY), bronze (BZ); and three durable brushed finishes: satin brass (SB) satin nickel (SN), and brushed aluminum (AA). INCLUDED For Side Compartments: * Two (2) proprietary TR 20A Duplex Receptacles installed For Center Compartment: * One (1) 6ACT8A Mounting Plate * One (1) 6TRAC Mounting Plate * One (1) 6SER Mounting Plate 16 1/4 " (412mm) PART NUMBERS: 6AT2PBK (Black) 6AT2PGY (Gray) 6AT2PBZ (Bronze) 6AT2PSB (Satin Brass) 6AT2PSN (Satin Nickel) 6AT2PAA (Brushed Aluminum) NOTE: UL Fire Classified for up to 2-hour rated floors. NOTE: Receptacles can be wired as a standard or isolated ground device. NOTE: Includes one (1) 6TS Tile Shim. NOTE: Add 3H to sku for UL Fire Classified for up to 3-hour rated floors. For Bottom Feed Compartment: * One (1) 5BLH 1/2-Gang Blank Housing* * One (1) 1PTHA 1-Gang Pass-Through Housing Assembly * One (1) 575CHA 1/2-Gang 3/4 " Conduit Housing Assembly** 7 1/4 " 5BLH (184mm) 1PTHA 575CHA 20A Receptacles 4 " (102mm) 2 1/4 " 3 1/4 " (83mm) (58mm) 16 1/4 " Bottom View (412mm) No Bevel 3/16 " (4.8mm) Top View Flush Style Cover * Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA. ** Also includes junction box attached to the 3/4 " conduit. WWW.LEGRAND.US/WIREMOLD NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document. 205 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD