WIREMOLD / OPEN SPACE EVOLUTION™ 6AT SERIES POKE-THRU DEVICES Evolution 6 " Series Poke-Thru Devices Ordering Information (continued) 6STCP Recessed Prewired Poke-Thru Stem Assembly Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services. The poke-thru device installs into a 6 " (152mm) to a 6 1/8 " (156mm) diameter hole. The unit comes complete with a disposable sheet metal cover, two (2) pre-wired, preinstalled duplex receptacles and various low voltage devices plates. All of the devices are recessed 4 " (102mm) below the floor surface level. Designed to work with the 6CTC2 and 6CT2 style covers. NOTE: UL Fire Classified for up to 2-hour rated floors. INCLUDED For Side Compartments: * Two (2) proprietary TR 20A Duplex Receptacles installed 16 1/4 " (412mm) For Center Compartment: * One (1) 6ACT8A Mounting Plate * One (1) 6TRAC Mounting Plate * One (1) 6SER Mounting Plate For Bottom Feed Compartment: * One (1) 5BLH 1/2-Gang Blank Housing* * One (1) 1PTHA 1-Gang Pass-Through Housing Assembly * One (1) 575CHA 1/2-Gang 3/4 " Conduit Housing Assembly** NOTE: Add 3H to sku for UL Fire Classified for up to 3-hour rated floors. 7 1/4 " (184mm) 5BLH 1PTHA 575CHA 20A Receptacles 4 " (102mm) 2 1/4 " 3 1/4 " (83mm) 16 1/4 " (412mm) Bottom View Top View (58mm) * Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA. ** Also includes junction box attached to the 3/4 " conduit. WWW.LEGRAND.US/WIREMOLD NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document. 213 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD