WIREMOLD / OPEN SPACE EVOLUTION™ 6AT SERIES POKE-THRU DEVICES Evolution 6 " Series Bottom Feed Center Mount Device Plates Ordering Information (continued) 15FFHA Bottom Housing Assembly One and a half-gang pass through housing assembly. Used for furniture feed applications on the center compartment only. Only for use with 6 " poke-thru units. 1BHA Bottom Housing Assembly One-gang bottom housing assembly. Designed to accept 175CHA, 1125CHA, 1PTHA, 1100CHA and 1BLH plates. Only for use with 6 " poke-thru units. 6AT Bottom Feed Center Mount Device Plate Location All Bottom Housing Assemblies on this page can be installed in the shaded locations indicated in this illustration. CAUTION: Receptacle supplied with this Poke-Thru is not suitable for direct field wiring. Contact manufacturer for replacement. Field modifications will void UL Listing and Classification. Replacement receptacle is limited to this manufacturers' Catalog No 68REC. Evolution Series 6 " Poke-Thru Device Specifications Copper Cross Sectional Area of Commonly Used Conductors SIZE SOLID #24 #23 #22 #14 #12 #10 #8 0.00032 sq. in. 0.00040 sq. in. 0.00050 sq. in. 0.00323 sq. in. 0.00512 sq. in. 0.00815 sq. in. 0.01296 sq. in. (0.206mm2 (0.258mm2 (0.322mm2 (2.083mm2 (3.303mm2 (5.258mm2 (8.361mm2 ) ) ) ) ) ) ) NOTE: Use above values for solid or stranded conductors. 6AT Copper Cross-Section OUTER CHANNELS Max Copper X-Section Max # Conductors 0.0154 sq. in. (9.9mm2 ) (3) 12 AWG 6ATCFF Copper Cross-Section - Furniture Feed Poke-Thru Devices CENTER CHANNEL 0.0387 sq. in. (24.97mm2 ) (12) 14 AWG NOTE: When using conductor sizes other than listed above, the aggregate cross-sectional area of the copper conductors shall not exceed the cross-sectional areas listed. Max Copper X-Section Max # Conductors NOTE: When using conductor sizes other than listed above, the aggregate cross-sectional area of the copper conductors shall not exceed the cross-sectional areas listed. POWER CHANNEL .0815 sq. in. (52.6mm2 ) (10) 10 AWG DATA CHANNEL (CENTER) 0.0686 sq. in. (44.3mm2 ) (22) Cat 6a DATA CHANNEL (OUTSIDE) 0.0187 (12.1mm2 ) (5) Cat. 6a 6AT Core Hole Sizes FLOOR TYPE Covered Floors (Carpet, Tile or Wood) Bare Concrete or Terrazzo 6 CORE SIZE (Min.) 6 " (152mm) (152mm) CORE SIZE (Max.) 6 1/8 " (156mm) 6 1/8 " (156mm) WWW.LEGRAND.US/WIREMOLD 221 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD