WIREMOLD / OPEN SPACE EVOLUTION™ 8AT SERIES POKE-THRU DEVICES Evolution 8 " Series Poke-Thru Devices Ordering Information (continued) Recessed Unwired Flush Style Poke-Thru Assembly Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services. The poke-thru device installs into an 8 " (203mm) to an 8 1/8 " (206mm) diameter hole. The unit comes complete with a flush style cover and five (5) open compartments for additional power, data or A/V devices. All 5 compartments are recessed 4 " (102mm) below the floor surface level. The flush style cover is an aluminum cover that is designed to sit flush with finished floor covering such as: carpet, tile, or wood and is available in three powder coat finishes: black (BK), gray (GY), bronze (BZ); and three durable brushed finishes: satin brass (SB) satin nickel (SN), and brushed aluminum (AA). INCLUDED For Side Compartments: * No Device Plates are included For Center Compartment: * No Device Plates are included For Bottom Feed Compartment: * One (1) 5PTHA 1/2-Gang Pass-Through Housing * Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly * One (1) 575CHA 1/2-Gang 3/4 " Conduit Housing Assembly* * One (1) 8DIV 8 " Divider 16 1/4 " (412mm) PART NUMBERS: 8AT2BK (Black) 8AT2GY (Gray) 8AT2BZ (Bronze) 8AT2SB (Satin Brass) 8AT2SN (Satin Nickel) 8AT2AA (Brushed Aluminum) NOTE: UL Fire Classified for up to 2-hour rated floors. NOTE: Includes one (1) 8TS Tile Shim. 9 1/4 " 1PTHA (241mm) 575CHA 4 " (102mm) 2 1/4 " 3 1/4 " (83mm) 5PTHA 16 1/4 " (412mm) Bottom View Top View (58mm) No Bevel 3/16 " (4.8mm) Flush Style Cover * Also includes junction box attached to the 3/4 " conduit. NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document. 226 WWW.LEGRAND.US/WIREMOLD POKE-THRUhttp://WWW.LEGRAND.US/WIREMOLD