WIREMOLD / OPEN SPACE EVOLUTION™ 10AT POKE-THRU DEVICES Evolution Series 10AT Poke-Thru Devices Cover Assemblies Ordering Information Surface Style Cover Assembly PART NUMBERS: 10CTCBK* (Black) 10CTCGY* (Gray) 10CTCBZ* (Bronze) 10CTCSB* (Satin Brass) 10CTCSN* (Satin NIckel) 10CTCAA* (Brushed Aluminum) 11 1/4 " (286mm) Low profile cover designed to attach to the 10STC and 10STCP Poke-Thru Stem Assemblies. Each cover is made from die-cast aluminum materials and equipped with a durable hinge which allows the cover to rotate open 180, two (2) slide egress doors that lock in the open position and auto close around the cables when the covers are closed, an 8 degree beveled edge that meets ADA guidelines and reduces tripping hazards. These covers are designed to sit on top of the finished floor surface such as: carpet, tile, wood, polished concrete and terrazzo.. Cover assembly is available in three powder coat finishes: black (BK), gray (GY), bronze (BZ); and three durable brushed finishes: satin brass (SB) satin nickel (SN), and brushed aluminum (AA). * Add suffix " TR " to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Evolution 10AT Series Accessories Ordering Information 10DIV Replacement Divider Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment. Cover Assemblies for the Evolution™ Series 10AT poke-thru devices are available in a variety of finishes and service configurations for carpet or tile floor installations. 8° Beveled Edge 3/16 " (4.8mm) 10TUN Tunnel Tunnel allows for a single service to be fed from one external compartment across the opposite external compartment while maintaining service separation. 10PPS Pre-Pour Sleeve ABPLUG10 Abandonment Plug Assembly Nonmetallic sleeve attaches to structural decking or plyood base and maintains a 10 " - 10 1/8 " (254mm - 257mm) cast in hole. Includes three (3) attachment lugs, three (3) thumb screws and two (2) end caps. Complete abandonment plug assembly for 10 " opening. Assembly includes intumescent fire stop material to maintain a 2-hour fire rating of the floor. WWW.LEGRAND.US/WIREMOLD 241 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD