WIREMOLD / OPEN SPACE RC7 SERIES™ POKE-THRU DEVICES RC7 Series Poke-Thru Devices Ordering Information (continued) Abandonment Plate 5 " (127mm) Poke-Thru Controlled Receptacle PART NUMBERS: RC7SHTCBKCR (Black) RC7SHTCBSCR (Brass) RC7SHTCGYCR (Gray) RC7SHTCAACR (Aluminum) Nonmetallic slide holder assembly with controlled receptacle markings. Markings are located in a recess pad and are permanent indicating the duplex receptacle below has been wired up to comply with 2014 NEC® and ASHRAE Energy Efficiency Standard 90.1. Available in Black (BK), Brass (BS), Gray (GY) and Aluminum (AA). Slide holder to be used with RC7ATC and RC7CTC units. Assembled Poke-Thru Device PART NUMBERS: RC7ATCAA (All Aluminum) RC7ATCAB (All Brass) RC7ATCGY (Gray) RC7ATCBK (Black) RC7ATCAL (Aluminum) RC7ATCBS (Brass) 7 " (178mm) ABPLUG3 Abandonment Plug Assembly 7 " (178mm) 16 1/2 " (419mm) Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Aluminum and brass flanges shipped with black slide cover. Includes Wiremold Open System unloaded inserts. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: RC7 Series poke-thru devices require a 3 1/16 " (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. Slide Holder Assembly 5 " (127mm) PART NUMBERS: RC7SHTCGY (Gray) RC7SHTCBK (Black) RC7SHTCAA (Aluminum) RC7SHTCBS (Brass) Nonmetallic slide holder assembly. Assembled with scrub water gasket. For use on tile or carpet floors. 3 3/16 " (97mm) Complete plug assembly for abandoning an open 3 " (76mm) diameter hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, inte gral retainer ring to prevent the unit from pulling up through the floor and a black diecast aluminum cover. COM75 Communication Adapter For two 3/4 " trade size conduit connections (COM75). No additional capacity with COM75. NOTE: RC7 Series poke-thru devices require a 3 1/16 " (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. PART NUMBERS: RC7APTCGY (Gray) RC7APTCBK (Black) 5 " (127mm) NOTE: To abandon the RC7 Series Poke-Thru Device, the internal gasket, duplex receptacle and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. , CA Title 24 RC37REC, RC37REC-25 Replacement Receptacle Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. The RC37REC-25 is available with 25 foot leads and can be wired as standard duplex or isolated ground. WWW.LEGRAND.US/WIREMOLD 249 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD