WIREMOLD / OPEN SPACE AV3 SERIES™ POKE-THRU DEVICES AV3 Series Poke-Thru Devices Ordering Information (continued) Finish Flange & Slide Holder Abandonment Plate 8 1/4 " (210mm) PART NUMBERS: AV3CTCAA (All Aluminum) AV3CTCAB (All Brass) AV3CTCGY (Gray) AV3CTCBK (Black) AV3CTCAL (Aluminum) AV3CTCBS (Brass) Incudes one prewired TR 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Includes one adapter to accept Wiremold AVIP or Extron® Electronics MAAP mini NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. architectural adapter plates, Wiremold Open System adapters and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. 8 1/4 " (210mm) Assembled Poke-Thru Device PART NUMBERS: AV3ATCAA (All Aluminum) AV3ATCAB (All Brass) AV3ATCGY (Gray) AV3ATCBK (Black) AV3ATCAL (Aluminum) AV3ATCBS (Brass) 17 " 1 1/4 " Trade Size Conduit Stem 3/4 " Trade Size Conduit Stem (432mm) A/V device incudes one prewired TR 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Includes one adapter to accept Wiremold AVIP or Extron® Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: AV3 Series poke-thru devices require a 4 " (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. Slide Holder PART NUMBERS: AV3SHTCGY (Gray) AV3SHTCBK (Black) AV3SHTCAL (Aluminum) AV3SHTCBS (Brass) 5 3/4 " (146mm) Nonmetallic slide holder assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. WWW.LEGRAND.US/WIREMOLD 3 7/8 " (98mm) PART NUMBERS: AV3APTCGY (Gray) AV3APTCBK (Black) 5 3/4 " (146mm) Abandonment Plate available in black or gray. RC37REC, RC37REC-25 Replacement Receptacles Prewired snap-in TR 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. The RC37REC-25 is available with 25 foot (7.62m) leads and can be wired as standard duplex or isolated ground. ABPLUG4 Abandonment Plug Assembly 7 1/2 " (191mm) Complete plug assembly for abandoning an open 4 " (102mm) diameter hole. Assembly includes intumescent fire-stop material to maintain the fire classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor and a black die-cast aluminum cover. NOTE: AV3 Series poke-thru devices require a 4 " (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. Poke-Thru Controlled Receptacle PART NUMBERS: AV3SHTCBKCR (Black) AV3SHTCBSCR (Brass) AV3SHTCGYCR (Gray) AV3SHTCAACR (Aluminum) Nonmetallic slide holder assembly with controlled receptacle markings. Markings are located in a recess pad and are permanent indicating the duplex receptacle below has been wired up to comply with 2014 NEC® and ASHRAE Energy Efficiency Standard 90.1. Available in Black (BK), Brass (BS), Gray (GY) and Aluminum (AA). Slide holder to be used with the AV3ATC and AV3CTC units. 253 , CA Title 24 POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD