WIREMOLD / OPEN SPACE RC4 SERIES™ POKE-THRU DEVICES RC4 Series Poke-Thru Devices Ordering Information (continued) Poke-Thru Controlled Receptacle PART NUMBERS: RC4SHTCBK2CR (Black) RC4SHTCBS2CR (Brass) RC4SHTCGY2CR (Gray) RC4SHTCAA2CR (Aluminum) (210mm) Assembled Poke-Thru Device PART NUMBERS: RC4ATCAA (All Aluminum) RC4ATCAB (All Brass) RC4ATCGY (Gray) RC4ATCBK (Black) RC4ATCAL ( Aluminum) RC4ATCBS (Brass) 8 1/4 " 16 3/8 " (416mm) Nonmetallic slide holder assembly with controlled receptacle markings. Markings are located in a recess pad and are permanent, indicating the duplex receptacle below has been wired up to comply with 2014 NEC® , CA Title 24 and ASHRAE Energy Efficiency Standard 90.1. Available in Black (BK) Brass (BS), Gray (GY) and Aluminum (AA). On circuit " A " duplex receptacles are controlled. Slide holder to be used with the RC4ATC & RC4CTC units. Poke-Thru Controlled Receptacle PART NUMBERS: RC4SHTCBK4CR (Black) RC4SHTCBS4CR (Brass) RC4SHTCGY4CR (Gray) RC4SHTCAA4CR (Aluminum) Unit includes four prewired TR 20A receptacles. Each duplex receptacle is wired as a separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: If wiring for Isolated Ground, attach orange IG label (supplied). NOTE: RC4 Series poke-thru devices require a 4 " (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 " minimum. Abandonment Plate Nonmetallic slide holder assembly with controlled receptacle markings. Markings are located ina recess pad and are permanent, indicating both of the duplex receptacles below have been wired up to comply with 2014 NEC® , CA Title 24 and ASHRAE Energy Efficiency Standard 90.1. Available in Black (BK), Brass (BS), Gray (GY) and Aluminum (AA). Both circuit duplex receptacles are controlled. Slide holder to be used with the RC4ATC and RC4CTC units. Finish Flange & Slide Holder Assembly PART NUMBERS: RC4CTCAA (All Aluminum) RC4CTCAB (All Brass) RC4CTCGY (Gray) RC4CTCBK (Black) RC4CTCAL ( Aluminum) RC4CTCBS (Brass) 8 1/4 " (210mm) Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. WWW.LEGRAND.US/WIREMOLD 257 6 1/4 " (159mm) PART NUMBERS: RC4APTCGY (Gray) RC4APTCBK (Black) COM75 Communication Adapter Provides two 3/4 " trade size threaded openings to accommodate conduit connections. POKE-THRU INDEXhttp://WWW.LEGRAND.US/WIREMOLD