WIREMOLD / OPEN SPACE RACEWAY-TO-CONNECTRAC TRANSITIONS Provide Greater Flexibility in Supplying Power & Data to Connectrac® Raceway Systems The 2400D® and 4000® Series Raceway-toConnectrac Transition Fittings allow users to transition from on-wall raceway to on-floor Connectrac raceways, either with an Express Kit or Flex® Raceway with a transition at the wall edge. This transition allows installers to run raceway along the perimeter of a room and bring power and data to the center of the room with the pre-wired Connectrac solutions. For transitions that include a Flex Raceway, an additional entrance end fitting must be used that is designed to work with the raceway transition fittings. For transitions to an Express Kit, no additional entrance end fitting needs to be used and the pre-wired conduit can be directly terminated with the raceway. CODE REFERENCE cULus Listed: Surface Metal Raceway System; Fittings: File E41751. Multioutlet Assembly Fittings: Surface Mounted Entrance End Fitting. File E514566 Features and Benefits: * Supports Over-Floor and UnderCarpet Installations. Both raceway transitions support transitioning to over-floor and under-carpet Connectrac raceway systems. * Compatible with Multiple Systems. Each transition can work with either Flex® Raceway or Express Kit systems. * Supports Power, Data & AV. Transitions are designed to allow for separation of services to be maintained and supports up to 3-channels of Flex® raceway for support of up to 28 CAT6 cables. * Multiple Finishes. Matches existing raceway finishes with Ivory and Fog White options for 2400D Series, and Ivory and Gray for 4000 Series raceways. * Designed for Common Raceway Profiles. Transition fittings are available to feed Connectrac floorbased raceways from 4000, and 2400D Series wall-mounted raceway systems. WWW.LEGRAND.US/WIREMOLD 313 ON-FLOOR AND UNDER-CARPET RACEWAY INDEXhttp://WWW.LEGRAND.US/WIREMOLD