WIREMOLD / PERIMETER SYSTEMS PLUGMOLD® AL2000TR SERIES™ Plugmold AL2000TR Series Ordering Information Raceway Base PART NUMBERS: AL2000B-5 (5' Length) AL2000B-10 (10' Length) 1 7/16 " (37mm) 6063-T5 extruded aluminum, satin anodized finish, .060 " (1.5mm) nominal thickness. Packed (12) 5' (1.5m) lengths (AL2000B-5) or six 10' (3m) lengths (AL2000B-10) per carton. AL2000C-5 Raceway Cover 1 7/16 " (37mm) 1 1/8 " (29mm) 1 7/16 " (37mm) Pressure-Type Wire Connectors 1 5/16 " (33mm) 6063-T5 extruded aluminum, satin anodized finish, .060 " (1.5mm) nominal thickness. Packed (12) 5' (1.5m) lengths per carton. AL2000TR Base and Cover shown assembled. Cross sectional area 1in.2 (1037mm2 ). Ground Stud 1 " (25mm) 1 7/16 " (37mm) AL2003 Mounting Clip (Spring Steel) Supports lengths of AL2000TR Series Raceway at any point desired. Mount to surface with No. 8 flathead screw. AL2006 Cover Clip (Spring Steel) Covers seam where lengths of cover or base come together. AL2009 Ground Clamp (Galvanized Steel) 1 1/2 " (38mm) Connects equipment grounding conductor to provide additional ground to raceway. W30/W30G - This part comes with both 16-W30 and 8-W30G. W30 - For common connection of two, three, or four No. 12 or No.14 solid copper conductors. W30G - For connection of equipment grounding of two, three, or four No.12 or No. 14 AWG solid conductors. 300V maximum; 20A 105° C maximum. NOTE: Not for use with aluminum conductors. AL2000WC Wire Retainer (Nonmetallic) Holds conductors in place in raceway base. 3/4 " (19.1mm) AL2010B Blank End Fitting 1 3/8 " (35mm) Closes off end of AL2000TR Series Raceway. 1 " (25mm) AL2001 Coupling (Galvanized Steel) 1 1/2 " (38mm) Joins lengths of AL2000B Base. 1 3/16 " (30mm) 1 9/16 " (40mm) 45 WWW.LEGRAND.US/WIREMOLD 4 AL2011 Flat Elbow 3 " 3 " (76mm) (76mm) Right angle turn on same surface. Comes with two couplings. AL2010A Feed Fitting 1 3/8 " (35mm) End fitting with 1/2 " (12.7mm) hub adapter. 1 " (25mm) PLUGMOLDhttp://WWW.LEGRAND.US/WIREMOLD