WIREMOLD / PERIMETER SYSTEMS 3000 SERIES® RACEWAY 3000 Series Raceway Ordering Information (continued) 630C Raceway Cover Cutter Portable cutter for 3000 Series Raceway Cover. Provides clean and easy square cuts. 3 9/32 " (83mm) G3007C Device Bracket 4 1/2 " (115mm) 630CDK Replacement Blade Kit G3008C C-Hanger Case hard steel replacement blades and die set for 630C Cutter. G3000WC Wire Clip (Galvanized) Holds conductors in place. 1 " (25mm) 5 5/16 " (135mm) 4 1/8 " (105mm) G3008C C-Hanger can be mounted back-toback for double run of 3000 Series Raceway. G3008C G3001 Coupling (Galvanized) Joins lengths of 3000 Series Raceway. 2 1/4 " (57mm) G3001A Rigid Inside Coupling (Galvanized) 6 " (152mm) Supporting Clip 3/4 " (19.1mm) Blank End Fitting 1 3/8 " (35mm) PART NUMBERS: V3003 (Ivory) G3003 (Gray) 2 13/16 " (72mm) Supports lengths of 3000 Series Raceway at any point along length. Mounts with #8 flat head fasteners. Includes set screw for locking to raceway. Cover Clip 2 13/16 " (72mm) 3/4 " (19.1mm) Covers seam where two pieces of 3000 Series Raceway Cover come together. WWW.LEGRAND.US/WIREMOLD 1 3/8 " (35mm) 1 1/16 " (27mm) 4 1/4 " (108mm) PART NUMBERS: V3006E (Ivory) G3006E (Gray) 1 7/8 " (48mm) 2 3/4 " (70mm) 1 7/16 " (37mm) Closes off open end of 3000 Series Raceway. Has concentric 1/2 " and 3/4 " trade size KOs. Entrance End Fitting 2 1/8 " (54mm) 2 " (51mm) 1 " (25mm) PART NUMBERS: V3010C (Ivory) G3010C (Gray) Connects 3000 Series Raceway to rigid or flexible conduit. Concentric 1/2 " , 3/4 " and 1 " trade size KOs on end and each side. 491 PART NUMBERS: V3010B (Ivory) G3010B (Gray) Joins lengths of 3000 Series Raceway in installations where added rigidity is required, such as when raceway is suspended overhead. G3008C 3000 Series Raceway Suspends 3000 Series Raceway from structural ceilings. Designed for use with 3/8 " (9.5mm) threaded rod. Hangers should be installed no more than 5' (1.5m) apart along raceway run. Mounts standard after-market devices into 3000 Series Raceway. Accepts single-gang devices with 3.281 " (95mm) mounting centers. Use with commercially available flush plates (not included). Entrance End Fitting 1 3/8 " (35mm) 2 3/4 " (70mm) 1 7/16 " (37mm) 5/8 " (15.9mm) 1 3/8 " (35mm) 3 7/16 " (87mm) 5/8 " (15.9mm) Connects 3000 Series Raceway to 1/2 " trade size conduit and armored cable connectors. 1/2 " trade size KOs on end and each side of fitting. Can be connected to conduit boxes by using 1/2 " chase nipple. PART NUMBERS: V3010AE (Ivory) G3010AE (Gray) STEEL RACEWAY INDEXhttp://WWW.LEGRAND.US/WIREMOLD