WIREMOLD / PERIMETER SYSTEMS 4000® SERIES RACEWAY 4000 Series Raceway Ordering Information (continued) 4001DA Divider Clip (Galvanized) 1 " (25mm) Required for holding G4000D Divider in place. Use one every 2 1/2' (.762m). 4 1/2 " (114mm) 1 1/2 " (38mm) 1 3/4 " (44mm) Seam Clip PART NUMBERS: V4006 (Ivory) G4006 (Gray) Covers seams where two sections of 4000 Series Raceway covers come together. Blank End Fitting 1 1/4 " (32mm) PART NUMBERS: V4010B (Ivory) G4010B (Gray) Closes off open end of 4000 Series Raceway. Has two 1/2 " trade size KOs to facilitate end feeding. Entrance End Fitting 4 3/4 " (121mm) 2 3/4 " (70mm) 5 1/4 " (133mm) 6 1/2 " (165mm) PART NUMBERS: V4010DFO (Ivory) G4010DFO (Gray) Full capacity entrance end fitting. Has concentric 3/4 " , 1 " , and 1 1/4 " trade size KOs on end and bottom for feeding 4000 Series Raceway. Includes removable divider and 1 1/4 " (32mm) bend radius control insert for UTP/STP and fiber optic cable installations. Flat Elbow 4 3/4 " (121mm) 1 3/4 " (44mm) Right angle turns on the same surface. 12 " (305mm) PART NUMBERS: V4011 (Ivory) G4011 (Gray) 10 " (254mm) 8 3/4 " (222mm) Radiused Full Capacity Flat Elbow PART NUMBERS: V4011FO (Ivory) G4011FO (Gray) Full capacity 90° flat corner used in divided or undivided applications. 2 " (51mm) bend radius control for UTP, STP and fiber optic installations. Ideal for new installations when the cable is lay-in or pull-through. Internal or External 45° Elbow 1 1/8 " (29mm) 1 1/2 " (38mm) PART NUMBERS: V4012TX (Ivory) G4012TX (Gray) Assembled as an internal elbow. Internal or external 45° turns in a run of 4000 Series Raceway. Can also be assembled as an inverted 45° elbow. Assembled as an external elbow. Wall Box Connector 12 " (305mm) PART NUMBERS: V4014A (Ivory) G4014A (Gray) Direct feeding. Direct feeding with divider. Feeding from wall box. Base has two concentric 1 " , 3/4 " , and 1/2 " trade size KOs, two concentric 1 1/4 " , and 1 " KOs (undivided only), and two rectangular 2 9/16 " x 1 11/16 " KOs. Tee PART NUMBERS: V4015 (Ivory) G4015 (Gray) For branching raceway at right angles. Use with undivided raceway only. Join to raceway run with two pair of 4001A Couplings (not included). Divided Tee 10 " (254mm) PART NUMBERS: V4015D (Ivory) G4015D (Gray) 12 " (305mm) 498 WWW.LEGRAND.US/WIREMOLD For branching raceway at right angles. Use with divided raceway only. Join to raceway run with two pair of 4001A Couplings (not included). STEEL RACEWAYhttp://WWW.LEGRAND.US/WIREMOLD