WIREMOLD / PERIMETER SYSTEMS S4000® SERIES RACEWAY S4000 Series Raceway Wire Fill Capacities for Communications (continued) S4010D Entrance End Fitting S4017 Internal Elbow 2 3/4 " (70mm) 3 3/4 " (95mm) 6 3/8 " (162mm) Has concentric 1/2 " and 3/4 " trade size KOs on end, sides, and bottom for feeding S4000 Series Raceway. Use punch kit to increase KO size up to 1 1/4 " . Removable divider and two No. 10-32 ground terminals included. S4011 Flat Elbow 4 3/4 " (121mm) 4 3/4 " (121mm) Right angle turns on the same surface. No couplings required. 90° internal corners. No couplings required. 3 1/8 " (79mm) G4017TCA Internal Corner Coupling Creates internal corner while continuing original run in a straight line. Galvanized finish. Use with or without divider. Fiber bushing included. 4010B Blank End Fitting required for installation (not included). S4018 External Elbow S4014A Wall Box Connector 14 " (356mm) Base has two concentric 3/4 " , and 1/2 " trade size KOs, two concentric 1 1/4 " and 1 " trade size KOs (undivided only), and two rectangular 2 9/16 " x 1 11/16 " (65mm x 43mm) KOs. Includes cover and two No. 10-32 ground terminals. 1 9/16 " (39mm) 5 5/8 " (143mm) 90° external corners. Connect to raceway with G4001 Couplings (not included). 3 1/4 " (83mm) 5 1/2 " (140mm) S4007C-1 One-Gang Device Plate 3 3/4 " Direct feeding. Direct feeding with divider. Feeding from wall box. (95mm) 1 9/16 " (40mm) S4015 Tee 12 " (305mm) Divides S4000 Series Raceway at right angles. Only for use with undivided raceway. Use two pair of G4001 Couplings to attach to raceway (not included). S4015D Divided Tee Divides S4000 Series Raceway at right angles. Only for use with divided raceway. Use two pair of G4001 Couplings to attach to raceway (not included). 12 " (305mm) 4 3/4 " (121mm) 4 1/2 " (114mm) For horizontal mounting of standard single-gang devices. Accepts industry standard single-gang faceplates for electrical and communication devices. WWW.LEGRAND.US/WIREMOLD 509 STEEL RACEWAY INDEXhttp://WWW.LEGRAND.US/WIREMOLD