WIREMOLD / PERIMETER SYSTEMS AL2000™ SERIES RACEWAY Two-piece, single-channel raceway. Satin anodized finish complements decor in commercial offices, laboratories, and health care facilities. CODE REFERENCE cULus Listed Raceway: File E4376 Guide RJPR. Fittings: File E41751 Guide RJPR. Raceway & Fittings: Meet Article 386 of NEC. Multioutlet Assemblies: Meet Article 380 of NEC. AL2000 Series Raceway System Layout KEY D B C A A. Supply conductors may be fed through AL2010A Feed End Fitting. This system is designed with capacity for additional feed or circuitry conductors. G F E B. Attach base section to mounting surface with AL2003 Spring Mounting Clips, or by drilling 9/32 " (7.1mm) holes in the base and use #8 flathead screws. C. Connect circuit wires with connectors. D. Additional multiple outlet sections or AL2000 Raceway sections may be attached at ends with AL2001 Coupling. NOTE: Illustration is for showing product applications only. NOTE: To remove cover, insert screwdriver into groove, push down and twist. IMPORTANT: All mounting methods must result in a flush interior surface. Special outlet assemblies manufactured to specifications. Consult factory. E. Close ends with blank end fitting (AL2010B), or with feed end fittings (AL2010A). F. Snap in cover section. G. In-line receptacle AL2043TR. COLOR OPTIONS AL2000 Series™ Raceway is available with a satin anodized finish. 53 WWW.LEGRAND.US/WIREMOLD 4 ALUMINUM RACEWAYhttp://WWW.LEGRAND.US/WIREMOLD