WIREMOLD / PERIMETER SYSTEMS AL2400 SERIES™ RACEWAY AL2400 Series Raceway Ordering Information Raceway Base PART NUMBERS: AL2400B-5 (5' Length) AL2400B-10 (10' Length) 2 " (51mm) 6063-T5 extruded aluminum, satin anodized finish, .060 " (1.5mm) nominal thickness. Packed (12) 5' (1.5m) lengths (AL2400B-5) or six 10' (3m) lengths (AL2400B10) per carton. AL2400C Raceway Cover 2 " (51mm) 6063-T5 extruded aluminum, satin anodized finish, .060 " (1.5mm) nominal thickness. Packed (12) 5' (1.5m) lengths per carton. AL2400WC Wire Retainer (Plastic) Holds conductors in place in raceway base. 1 1/2 " (38mm) 2 " (51mm) AL2401 Coupling (Galvanized Steel) 2 3/4 " (70mm) AL2415 Tee 4 " Joins lengths of AL2400B Base. 1 3/4 " (44mm) (102mm) AL2410B Blank End Fitting 2 " (51mm) Closes off open end of raceway. 1 1/4 " (32mm) AL2410B2 Feed Fitting 2 " (51mm) End fitting with plastic 1/2 " trade size KO. 1 1/4 " (32mm) AL2411 Flat Elbow 4 " 4 " (102mm) (102mm) Right angle turn on same surface. Two AL2401 Couplings included. 6 " (152mm) Branch connection of two runs of AL2400 Series Raceway. Three AL2401 Couplings included. 2 " (51mm) AL2406 Cover Clip (Spring Steel) AL2416 Cross Fitting 6 " Covers seam where lengths of cover or base come together. 1 " (25mm) (152mm) 6 " (152mm) Cross connection of two runs of AL2400 Series Raceway. Four AL2401 Couplings included. 2 " (51mm) AL2409 Ground Clamp (Galvanized Steel) AL2417 Internal Elbow 1 1/2 " (38mm) Connects of equipment grounding conductor to provide an additional ground to raceway. #10 Ground Stud with Cup Washer 4 " (102mm) Makes 90° internal corners. Two AL2401 Couplings included. 4 " (102mm) WWW.LEGRAND.US/WIREMOLD 539 ALUMINUM RACEWAY INDEXhttp://WWW.LEGRAND.US/WIREMOLD