WIREMOLD / PERIMETER SYSTEMS 5500 SERIES™ RACEWAY Ordering Information Base Seam Clip 7/8 " [22.2mm] PART NUMBERS: 5506B (Ivory) 5506B-WH (White) 1 3/4 " [44mm] For covering seam where two pieces of 5500BD3 Base come together. Blank End Fitting 1 13/16 " [46mm] 6 7/8 " [175mm] 3/8 " [9.5mm] 6 7/8 " [175mm] Entrance End Fitting 5 13/16 " 3 1/4 " [83mm] [148mm] 6 7/8 " [175mm] For feeding raceway from larger conduits. Has concentric 3/4 " , 1 " , 1 1/2 " , and 2 " trade size KOs on end and back. Two removable dividers are included. [175mm] Radiused Full Capacity Flat Elbow PART NUMBERS: 5511 (Ivory) 5511-WH (White) 6 7/8 " 9 3/16 " [233mm] Each Leg 8 9/16 " [217mm] 90° flat corner with integral dividers that provides a 2 " [51mm] cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Backfeed Connector 8 " [203mm] 6 11/16 " [170mm] PART NUMBERS: 5514A (Ivory) 5514A-WH (White) Use when a is needed. Has three rectangular KOs for use with existing wall box and three 1/2 " , 3/4 " , and 1 " trade size KOs. Tee/Take-Off Connector 3 1/16 " [78mm] 9 1/8 " [232mm] PART NUMBERS: 5515 (Ivory) 5515-WH (White) 8 3/16 " [208mm] For branching raceway at right angles. 59 WWW.LEGRAND.US/WIREMOLD 8 3 1/2 " [89mm] PART NUMBERS: 5510D (Ivory) 5510D-WH (White) Each Leg Bend Radius Full Capacity External Elbow PART NUMBERS: 5518FO (Ivory) 5518FO-WH (White) 4 " [102mm] 6 7/8 " [175mm] 3 1/2 " [89mm] Each Leg Transition Fitting 2 3/8 " [60mm] PART NUMBERS: 5574 (Ivory) 5574-WH (White) 9 " [229mm] 3 3/16 " [81mm] Makes transition from 5500 Series Raceway to the 400, 800, 2300, PN03, PN05 and PN10 Latching Series Raceways. 90° external corner with integral dividers that provide a 2 " [51mm] cable bend radius for UTP and fiber optic installations. Use the 5518FO for a alternative to the 5518. PART NUMBERS: 5510 (Ivory) 5510-WH (White) For closing open end of 5500BD3 Raceway. Three 1/2 " trade size KOs for end feed. External Elbow 1 1/4 " [32mm] Bend Radius Full Capacity Internal Elbow PART NUMBERS: 5517FO (Ivory) 5517FO-WH (White) 4 " [102mm] Each Leg 4 1/2 " [114mm] 1 13/16 " [46mm] 6 7/8 " [175mm] 90° internal corner with integral dividers that provides a 2 " [51mm] cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. PART NUMBERS: 5518 (Ivory) 5518-WH (White) For right angle turns around external corners. NONMETALLIC RACEWAYhttp://WWW.LEGRAND.US/WIREMOLD