WIREMOLD / INFLOOR SYSTEMS PRO SERIES SERVICE FITTINGS Walkerduct Pro Series Flush Carpet Plates Ordering Information Compatible with Walkerduct Pro Series only Flush Duplex Carpet Plate 4 5/8 " (117mm) 428B525 Flush 525 Series Carpet Plate 4 5/8 " (117mm) PART NUMBERS: 428DR (Single Duplex Opening) 428DR2 (Double Duplex Opening) 3 7/8 " (98mm) 3 7/8 " (98mm) For carpet floors only. Steel plate mounts inside preset and is adjustable to floor height. 428B075 Flush Conduit Carpet Plate 3 7/8 " (98mm) 4 5/8 " (117mm) 3 7/8 " (98mm) 4 5/8 " (117mm) Openings to attach 525 Series Service Fitting on carpet plate. For carpet floors only. Steel plate mounts inside preset and is adjustable to floor height. Center hole diameter is 1 5/8 " (41mm). Opening fits 3/4 " trade size conduit or liquidtite. Includes spacer for liquidtite connection. For carpet floors only. Steel plate mounts inside preset and is adjustable to floor height. 428BL Blank Flush Carpet Plate 3 7/8 " (98mm) 4 5/8 " (117mm) Flush Duplex Carpet Trim Plate PART NUMBERS: 433DR (For Single Duplex Openings) 433DR2 (For Double Duplex Openings) 4 3/4 " (121mm) 5 3/8 " (137mm) Carpet plate and finishing plate. Flush steel plate mounts inside preset and is adjustable to floor height. Brushed aluminum finishing plate covers carpet plate and mounts over carpet. Flush plate is 3 7/8 " x 4 5/8 " (98mm x 117mm). Blank carpet plate for custom punched openings or for abandoning preset. For carpet floors when used for activations. Steel plate mounts inside preset and is adjustable to floor height. Important: A minimum 1 1/2 " (38mm) preset or afterset is required on Pro Series Underfloor Duct to support standard duplex receptacles and communication devices when using flush activations. The 1 " (25mm) preset or afterset should be specified for pedestal style fittings or when cabling will be pulled through the activation point. Walkerduct Pro Series Service Fittings Installation Details 525 Trim Plate Brass or Aluminum Conduit Trim Plate Cat. No. 431AL075 Openings Fit 3/4 " trade size Conduit Conduit and Lock Washers Not Included Brass Flange and Covers Cat. Nos. 827B, 828R and 829STC Cat. No. 430S505 525 Series Service Fitting Less Base Plate Flush Carpet Plate Cat. No. 428BL Flush Double Duplex Carpet Plate Cat. No. 428DR2 Receptacle Screws Must Be Removed Before Installation Flush Carpet Plate Cat. No. 428B075 Conduit and Lock Washer Not Included Important: Flush carpet plates are to be used only within a protected, enclosed environment such as under a retail counter with carpeted floors. WWW.LEGRAND.US/WIREMOLD 703 INFLOOR SYSTEMS INDEXhttp://WWW.LEGRAND.US/WIREMOLD