WIREMOLD / INFLOOR SYSTEMS FLOORPORT™ Compatible with Walkercell F P FloorPort Series: Cover Style: Blank Top Cutout Top Top Style: = B = C Furniture Feed = FF Tile (flangeless) = T Tile/Carpet (flanged) = TC Cover Color: Nickel Brass Black Origin: = NK = BS = BK Bronze = BZ Gray Cutout Cover Assembly 7 3/4 " (197mm) 6 1/2 " (165mm) PART NUMBERS: FPCTCBK-NA (Black) FPCTCBZ-NA (Bronze) FPCTCBS-NA (Brass) FPCTCNK-NA (Nickel) FPCTCGY-NA (Gray) Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Blank Cover Assembly 7 3/4 " (197mm) 6 1/2 " (165mm) PART NUMBERS: FPBTCBK-NA (Black) FPBTCBZ-NA (Bronze) FPBTCBS-NA (Brass) FPBTCNK-NA (Nickel) FPBTCGY-NA (Gray) Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. S3AXBP Blanking Plate Aluminum top plate with steel support plate and four (4) adjusting screws. Bend Radius Grommet = GY Furniture Feed Cover Assembly PART NUMBERS: FPFFTCBK (Black) FPFFTCBZ (Bronze) FPFFTCBS (Brass) FPFFTCNK (Nickel) FPFFTCGY (Gray) 7 3/4 " (197mm) 6 1/2 " (165mm) Flanged cover for use in tile or carpet installation. Diecast aluminum assembly. Provided with one 1 " trade size screw plug for power or communication type cabling and one combination 1 1/4 " and 2 " trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. FP-CTR Bare Concrete and Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. NOTE: For RFB6 Series Floor Boxes. North American Made NA SERVICE FITTINGS North American Made FloorPort™ Series Flanged Cover Plates Ordering Information Floorport Part Number Configurator WPACR-1G Internal Bracket DTB-2-2A (Not Included) Load Capacities for FloorPort™ Cover Assemblies CATALOG NUMBERS MAXIMUM LOAD IN POUNDS FPCTC FPBTC FPFFT FPBT FPCT FPFF Bend Radius Grommet 1000 750 1000 750 1000 1000 NOTE: Load applied through a 2 " (51mm) mandrel in center of service fitting. Loads above are static loads only and do not pertain to rolling loads. 730 WWW.LEGRAND.US/WIREMOLD Two duplex receptacle brackets, receptacle insulators, power grommets, and bend radius control grommets. For use with recessed activations. Communication brackets ordered separately. INFLOOR SYSTEMShttp://WWW.LEGRAND.US/WIREMOLD