WIREMOLD / OPEN SPACE CCFB SERIES™ CONVENTION CENTER SERIES PRODUCTS Convention Center Floor Boxes Ordering Information Type S Box Multi-Utility Recessed Floor Box 12 1/16 " 19 9/16 " [496mm] [323mm] 1 7/8 " [47mm] Designed to accept power, communication and A/V devices, or water and compressed air. Boxes are available in an epoxy coated galvanized steel version or a stainless steel version. The Type S Box works with CCFBC-NS-H-C1 and CCFBC-CR-H-C1 Floor Box Covers. 16 1/2 " [419mm] 15 1/8 " [385mm] 7 5/16 " [186mm] Interior View Wide Side View Side View Module NOTE: Boxes and Device Plates are custom made to order. " -XXXX " in title denotes Project Number assigned by Wiremold Project Services Team. POWER CAPABILITIES * 20/30/50/60 Amp Receptacles * 400 Amp Cam-Locks NOTE: Service feed openings are field installed. NOTE: Boxes and Covers are shipped separately. MAXIMUM ELECTRIC RATINGS * 140A, 480V 3 Phase * 140A, 120/208V 3 Phase * 100A, 277/480V 3 Phase for individually wired devices * 400 Amp Cam-Locks Multi-Utility Floor Box Covers Cast aluminum covers are designed in non-skid (NS) and carpet recessed (CR) versions. Covers are designed and tested to meet 32,000 lb. load rating with a safety factor of 2 (64,000 lbs.). Covers are hinged (H) to open a full 180° and meet UL Scrub Water requirements. Use with Type S Floor Boxes. CCFBC-NS-H-C1 CCFBC-CR-H-C1 OR OTHER UTILITIES * Water * Compressed Air 19.1/8 " [486mm] 19 1/8 " [486mm] 1 5/16 " [34mm] 12.1/2 " NOTE: Load was applied in the center of the cover over a 1 " x 16 " rectangular bar. WWW.LEGRAND.US/WIREMOLD [317mm] NOTE: Boxes and Covers are shipped separately. 97 1 5/16 " [34mm] 12.1/2 " [317mm] FLOOR BOXES INDEXhttp://WWW.LEGRAND.US/WIREMOLD