WIREMOLD / OPEN SPACE CCFB SERIES™ CONVENTION CENTER SERIES PRODUCTS Convention Center Floor Boxes Ordering Information (continued) Type SS Box Multi-Utility Recessed Floor Box 19 9/16 " [496mm] 23 15/16 " [607mm] 1 7/8 " [47mm] 21 3/16 " [538mm] Designed to accept power, communication and A/V devices, or water and compressed air. Boxes are available in an epoxy coated galvanized steel version or a stainless steel version. The Type SS Box works with CCFBC-NS-H-C3 and CCFBC-CR-H-C3 Floor Box Covers. 16 15/16 " [431mm] 15 1/8 " [385mm] Interior View Wide Side View Side View Module NOTE: Boxes and Device Plates are custom made to order. " -XXXX " in title denotes Project Number assigned by Wiremold Project Services Team. POWER CAPABILITIES * 20/30/50/60 Amp Receptacles * Panel Mounted Circuit Breakers * 350A 600V Terminal Blocks * 400 Amp Cam-Locks Multi-Utility Floor Box Covers Cast aluminum covers are designed in non-skid (NS) and carpet recessed (CR) versions. Covers are designed and tested to meet 32,000 lb. load rating with a safety factor of 2 (64,000 lbs.). Covers are hinged (H) to open a full 180° and meet UL Scrub Water requirements. Use with Type SS Floor Boxes. CCFBC-NS-H-C3 19 1/16 " [484mm] CCFBC-CR-H-C3 19 1/16 " [484mm] NOTE: Service feed openings are field installed. NOTE: Boxes and Covers are shipped separately. MAXIMUM ELECTRIC RATINGS * 140A, 480V 3 Phase * 140A, 120/208V 3 Phase into Terminal Blocks * 100A, 277/480V 3 Phase for individually wired devices * 400 Amp Cam-Locks OR OTHER UTILITIES * Water * Compressed Air Note: 3 inch or 4 inch drain in Utility Compartment only. Note: 2 inch drain in Power Compartment. 23 5/8 " [600mm] 23 5/8 " [600mm] NOTE: Load was applied in the center of the cover over a 1 " x 16 " rectangular bar. WWW.LEGRAND.US/WIREMOLD NOTE: Boxes and Covers are shipped separately. 99 FLOOR BOXES INDEXhttp://WWW.LEGRAND.US/WIREMOLD