Marker Technical Manual 2021/2022 - 111

15.4 SKIER INSTRUCTION
SKIER INSTRUCTION:
After the final inspection the function unit ski / ski binding / ski boot
has to be given to the customer together with the workshop form
and the in - box instructions.
* Explain the bindings compatability with boot sole types.
(ISO Alpine boot sole only Compatible)
-or(ISO
Alpine and ISO Alpine Touring Compatible)
IMPORTANT !
One of the most important responsibilities of the MARKER
Authorized Retailer is to ensure that proper skier instructions
and warnings are provided every time a MARKER ski
binding is sold, serviced or rented. Whenever possible,
the following instructions should be given directly to the
intended user. If the skier is a minor, the instructions
should be given in the presence of both parents or legal
guardian and the skier.
ENTRY:
* Make sure that the boot sole is clear of snow, ice and dirt
* Open the heel cup by pressing down the opening lever with the ski
pole tip, boot sole, ski tail or hand.
* Center the ski boot in the toe cups and step straight down into
the heel cup.
EXIT:
FOR ALL TWIN CAM STEP - IN, COMPACT STEP - IN, HOLLOW LINKAGE
AND INTER PIVOT HEELS:
* Press down on the opening lever with the ski pole tip, boot sole,
ski tail or hand.
EXITING IN AN AWKWARD POSITION:
* If the heel is closed, open the heel by pressing down on the opening
lever. Re - enter the system.
* After lateral release always exit the ski binding and re - enter
again.
RE - ENTER THE SYSTEM:
* If the heel is closed, open the heel by pressing down on the opening
lever.
* In soft snow while stepping in the force can be reduced
► by pulling the opening lever (all Step - In heels)
SYSTEM EXPLANATION FOR THE SKIER:
* Explain the boot - to - binding adjustment.
* Show where the release adjustment screws are and explain the
adjustment at the visual indicators on the ski bindings and how
they correspond to the recorded numbers on the workshop
form. The skier should know his own DIN settings and / or skier
code.
* Explain when applicable, boots that are designed for or come
with interchangeable boot sole types must be adjusted for that
particular boot sole in order for the binding to function properly.
* Point out the left and the right ski indicators.
* If any system components are worn out of standard or otherwise
unsuitable for continued use, the skier must be clearly
informed of the problem and warned that continued use may
significantly increase his or her risk of injury.
* Advise that if any problem develops with any part of the function
unit ski / ski binding / ski boot it should be brought to a MARKER
Authorized Retailer for inspection and service.
RECEIPT OF IN - BOX INSTRUCTIONS:
* Whenever a new ski binding is delivered to the skier he or she
should receive the in - box instructions and the warranty information.
MAINTENANCE:
*
Explain to the skier that the ski binding should be kept clean and
free of dirt, rust, salt or other contaminants.
* Recommend that the complete function unit ski / ski binding /
ski boot has to be brought to a MARKER Authorized Retailer for
inspection prior to the beginning of each ski season.
SKIER SIGNATURE
* The skier must read, understand and agree to the conditions
specified in the workshop form and / or any release agreement.
* Make sure that the skier signs the workshop form and /or the
release agreement. If the skier is a minor, this document should
be signed by a parent or a legal guardian.
* A copy of the signed documents has to be handed to the customer.
IMPORTANT
!
The skier should understand that there are inherent and
other risks in the sport of skiing. Explain that the ski
binding will not release or retain under all circumstances
nor is it possible to predict every situation in which it will
release or retain and it is, therefore, no guarantee of his
or her safety.
109
15.4 SKIER INSTRUCTION
Marker Technical Manual 2021/2022

Table of Contents for the Digital Edition of Marker Technical Manual 2021/2022
