15.6 INFORMATION FOR THE SKIER - BARON EPF 15.6 - 1 180 ° ADDITIONAL INFORMATION FOR THE MARKER BARON EPF In addition to the system explanations 15.1 - 15.3, the following instructions must be given to the intended user of a MARKER BARON EPF: 15.6 - 2 WALK CHANGING FROM SKIING - MODE TO WALKING - MODE: The BCT engagement lever is located in the middle of the BCT plate. With this lever you can adjust two positions (skiing - mode / walking - mode). In order to change from the skiing - mode (locked position) to the walking - mode (unlocked position) switch the lever 180° backward (15.6 - 1 and 15.6 - 2). USING THE HIKING - AID: You can use a hiking - aid in two positions when you are in the walking - mode. 15.6 - 3 Hiking aid low position: * Fold the hiking - aid downward with the ski pole or by hand to the 7 ° position. (15.6 - 3) Hiking aid high position: * Fold the hiking aid down with the ski pole or by hand to the 13 ° position. (15.6 - 4) CHANGING FROM WALKING - MODE TO SKIING - MODE: In order to change from the walking - mode (unlocked position) to the skiing - mode (locked position) switch the lever 180° forward (15.6 - 5 and 15.6 - 6). 15.6 - 4 CAUTION ! Press down the BCT plate while you switch the BCT engagement lever to the locked position ! Assure that the BCT plate is fully and uniformly sliding into the heel plate attachments ! (15.6 - 7) REMARK: 15.6 - 5 180 ° Clean the bindings from snow and ice before changing from the walking - mode to the skiing - mode ! CAUTION ! Do not ski in the walking - mode (unlocked position) ! 15.6 - 6 SKI 15.6 - 7 112 15.6 INFORMATION FOR THE SKIER - BARON EPF TOUR CRAMPON