16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS 16.2 - 10 * Open the toe by pressing down the toe opening lever. (16.2 - 10) 16.2 - 11 180 ° * Switch the change-over lever 180° forward. (16.2 - 11) 16.2 - 12 * Open the heel. (16.2 - 12) 16.2 - 13 * Position the tip of the ski boot between the retaining pins on the toe. Then press the tip of the boot down and step into the toe. (16.2 - 13) 16.2 - 14 * The pins must be locked fully into position in the insert, the toe opening lever has to snap to the " Ski " position. (16.2 - 14) 16.2 - 15 POSITIONING THE HEEL: * Place the ski boot into the binding and turn the adjustment screw until the position of the heel is approximately right. (16.2 - 15) 118 16.2 INSTALLATION OF MARKER KINGPIN & KINGPIN MWERKS BINDINGS