16.3 INSTALLATION OF MARKER KINGPIN DEMO BINDINGS 16.3 - 1 toe DRILLING THE ATTACHMENT HOLES: * Place the MARKER PIN DEMO installation tool W015V1T in the correct position on the ski. (16.3 - 1) * Drill 4 holes for the toe through the front orange marked drill bushings. heel 16.3 - 2 REMARK: See DRILLING INSTRUCTIONS 3.2 * Drill 5 holes for the heel plate through the rear black marked drill bushings. * Remove the installation tool from the ski. ski tip 16.3 - 3 INSTALLING THE TOE PLATE: * Place the toe plate onto the ski. * Insert the enclosed screws. Tighten the screws lightly, then firmly. (16.3 - 2) B A 16.3 - 4 Ls * Slide the toe backward to the correct sole length in accordance with the sole length scale. (16.3 - 4) INSTALLING THE TOE: * Open the locking lever (A) and slide the toe with lever open from the front of the plate backward (B). (16.3 - 3) 120 16.3 INSTALLATION OF MARKER KINGPIN DEMO BINDINGS