16.4 MARKER KINGPIN - INFORMATION FOR BINDING ADJUSTMENT 16.4 - 1 BINDING RELEASE FORCE ADJUSTMENT SCREWS AND RELEASE VALUE INDICATOR SCALES REMARK: MARKER recommends adjustment with a Pozidriv® 3 screwdriver. ADJUSTMENT SCREWS AND INDICATOR SCALES ON THE HEEL VERTICAL RELEASE (16.4 - 1) 16.4 - 2 1 2 * Turn the adjustment screw (1) until the indicator line aligns with the selected release setting on the indicator scale (2). (16.4 - 2) LATERAL RELEASE (16.4 - 3) REMARK: To adjust the lateral release value fold down both hiking aids. * Turn the adjustment screw (3) until the indicator line aligns with the selected release setting on the indicator scale (4). (16.4 - 4) 16.4 - 3 FUNCTION TEST AND SERVICE KINGPIN bindings can be tested without restrictions on and with standard setting and calibration equipment. 16.4 - 4 RELEASE VALUE SELECTION AND ADJUSTMENT: * Following the correct adjustment for sole length and forward pressure, the release value has to be selected and adjusted. Use the weight method to match the individual skier's needs. See RELEASE VALUE SELECTION AND ADJUSTMENT: 12.1 - 12.3 3 4 CAUTION ! The release value selection and adjustment has to be done very accurately to care for the skier´s safety. All key information including the release value must be recorded in the workorder. 15.3 124 16.4 MARKER KINGPIN - INFORMATION FOR BINDING ADJUSTMENT