16.4 MARKER KINGPIN - INFORMATION FOR BINDING ADJUSTMENT 16.4 - 5 For all MARKER KINGPIN models, a distinction must be made between calibration equipment and tools that work purely based on torque (e.g. Montana, Vermont Calibrator etc.) and calibration equipment that initiates a trigger via a lever arm to which force is applied (e.g. Wintersteiger, Sportech, etc.). The process for equipment that works purely based on torque is as usual. (16.4 - 5) 16.4 - 6 Laser 180 ° The procedure is then identical to the procedure for all other Marker bindings. 4 cm 7 cm 16.4 - 7 REMARK: If you have any further questions on checking the binding with setting tools, please contact the Marker sales department or the manufacturer of the setting tool. For equipment that initiates a trigger via a lever arm to which force is applied, the ski has to be inserted the other way round. (The tip of the ski points in the opposite direction to normal). (16.4 - 6) REMARK: When mounting the binding make sure that you fit the enclosed stickers to the ski. (16.4 - 7) 125 16.4 MARKER KINGPIN - INFORMATION FOR BINDING ADJUSTMENT