17.5 MARKER ALPINIST / ALPINIST DEMO - ACCESSORIES For the customization of the binding models ALPINIST & ALPINIST DEMO MARKER offers locking bolts (U - bows) in 3 different settings: (1) A001S1UH MARKER ALPINIST U BOW - (Spring) Hi Setting (2) A001S1UM MARKER ALPINIST U BOW - (spring) Medium Setting (3) A001S1US MARKER ALPINIST U BOW - (Spring) Low Setting 1 2 3 17.5 - 1 1.5 * Loosen and remove the lock screw, this requires an # 1.5 Allen key. (17.5 - 1) U BOW - (Spring) Hi Setting: premounted on ALPINIST 12 U BOW - (Spring) Medium Setting: premounted on ALPINIST 10 U BOW - (Spring) Low Setting: ALPINIST 8 REPLACEMENT OF THE LOCKING BOLT U-BOW (SPRING): (Z 8 - 12) (Z 5 - 9) (Z 4 - 6) * Remove the locking element. (17.5 - 2) 17.5 - 2 * Pull the locking bolt backwards from the heel housing, slide the replacement bow (Spring) onto the housing. (17.5 - 3) * Attach the locking element to the heel, the locking element has to be flush with the heel housing. (17.5 - 4) 17.5 - 3 * Insert and tighten the lock screw. Do not exceed a tightening torque of 0.25 Nm. (17.5 - 5) 17.5 - 4 17.5 - 5 max. 0.25 Nm 149 17.5 MARKER ALPINIST & ALPINIST DEMO - ACCESSORIES