5.1 INSTALLATION OF MARKER BARON EPF 5.1 - 5 180 ° * Switch the engagement lever to the unlocked position (5.1 - 5) and lower the binding afterwards (5.1 - 6). 5.1 - 6 * Insert and tighten the 2 front screws (5.1 - 7). 5.1 - 7 7.1 - 8 180 ° * Press down the BCT plate and switch the engagement lever to the locked position (5.1 - 8). Check that the BCT plate is fully and uniformly sliding into the heel plate attachments. 5.1 - 9 CAUTION ! Ensure that the BCT plate is fully and uniformly sliding into the heel plate attachments when the BCT engagement lever is closed. (5.1 - 9) 5.1 - 10 POSITIONING THE HEEL: * Place the ski boot into the binding and turn the adjustment screw until the position of the heel is approximately right. (5.1 - 10) 31 5.1 INSTALLATION OF MARKER ROYAL FAMILY BINDINGS