7.4 INSTALLATION OF WORLD CUP PISTON CONTROL INTERFACE 7.4 - 16 3 2 1 3 2 1 Race XCell 1: 260 mm - 308 mm 2: 309 mm - 328 mm 3: 329 mm - 362 mm BINDING POSITIONING: (7.4 - 16 / 7.4 - 17) Toe: (7.4 - 16) Heel: (7.4 - 17) 4: 262 mm - 278 mm 5: 279 mm - 288 mm 6: 289 mm - 298 mm 7: 299 mm - 318 mm 8: 319 mm - 338 mm 9: 339 mm - 348 mm 10: 349 mm - 362 mm XComp 7.4 - 17 BINDING INSTALLATION: see INSTALLATION OF XCOMP BINDINGS 7.1 4 5 6 7 8 910 DUCK STANCE OPTION: REMARK: use 4.1 x 9.5 drill bit. TOE: (7.4 - 18) 7.4 - 18 The duck stance mounting position allows 3 mm lateral positioning of the toe. HEEL: (7.4 - 19) The duck stance mounting position allows 2 mm lateral positioning of the heel. 7.4 - 19 REMARK: For mounting the World Cup PC Interface 14 mm the enclosed mounting instruction 820223 is valid. When mounting the binding onto the plate please take note of the advice concerning the correct screw choice ! SCREW CHART FOR SPACERS Race XCell Toe + 2 mm + 4 mm inline screw 180171 (5.5 x 14.0) inline screw 180154 (5.5 x 20.5) Heel + 2 mm + 4 mm XComp Toe + 2 mm + 4 mm inline screw 180154 (5.5 x 20.5) inline screw 180154 (5.5 x 20.5) Heel + 2 mm + 4 mm inline screw 180074 (5.5 x 17.5) inline screw 180182 (5.5 x 28.0) inline screw 180074 (5.5 x 17.5) inline screw 180182 (5.5 x 28.0) Race XCell XComp 58 7.4 INSTALLATION OF WORLD CUP PISTON CONTROL INTERFACE