8.2 WIDERIDE XL TCX DEMO GRIPWALK IMPORTANT ! Wideride XL Demo GRIPWALK models are designed to mount only in conjunction with VÖLKL skis Deacon 79 and Flair 79. 8.2 - 1 A REMARK: ( 18.3) The binding models Wideride XL TCX GRIPWALK are designed for the following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " REMARK: For installation of the binding the sole length has to be adjusted to Ls = 328 mm. B 8.2 - 2 8.2 - 3 * Install the complete binding with the pre- installed toe and heel into the notches of the attachment. Slide the binding toward the ski tip until it stops. (8.2 - 1) CAUTION ! Check that the binding is fully and uniformly installed in the attachments (8.2 - 2 and 8.2 - 3) * Push the opening block [A], then lift the sole length fixation lever [B]. (8.2 - 4) * The hole of the middle plate has to be aligned with the bushing of the ski. (8.2 - 5) 8.2 - 4 B A 8.2 - 5 8.2 - 6 8.2 - 7 * Position the center fixation screw (8.2 - 6). With light downward pressure, tighten the screw by hand with a maximum torque of 3.0 Nm. (8.2 - 7) IMPORTANT ! Ensure correct screw choice: using the wrong center fixing screw can irreparably damage the bushing of the ski ! max. 3 Nm 61 8.2 INSTALLATION OF MARKER / VÖLKL SYSTEMS