9.1 INSTALLATION OF MARKER / K 2 MXCELL TCX D GRIPWALK MODELS/ REMARK: ( 18.3) The binding models MXCELL TCx Demo GRIPWALK are designed for the following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " 9.1 - 1 IMPORTANT ! MXCELL TCx Demo GRIPWALK models are designed to mount only in conjunction with K 2 skis with premounted plate system. The suitable ski models are listed on the set label or can be requested from K 2. INSTALLING THE TOE: * Slide the toe piece from the front onto the plate. Slide the toe backward until it stops (9.1 - 1). 9.1 - 2 CAUTION ! Make sure that the toe spacer rails engage both sides of the base plate properly. (9.1 - 1) * With slight pressure, screw the toe piece backwards onto the plate. (9.1 - 2) 9.1 - 3 SOLE LENGTH ADJUSTMENT: * Adjust the toe to the correct sole length in accordance with the sole length scale. (9.1 - 3) 9.1 - 4 IMPORTANT SAFETY ADVICE ! Make sure that you do not exceed the »STOP« marking on the plate when adjusting the sole length in forward direction ! (9.1 - 4) Ls 260 - 370 67 9.1 INSTALLATION OF MARKER / K 2 SYSTEMS