9.2 INSTALLATION OF MARKER / K 2 QUIKCLIK GRIPWALK MODELS 9.2 - 1 IMPORTANT ! Marker / K 2 Quikclik bindings are designed to mount only in conjunction with K 2 skis with premounted Quikclik plate system. The suitable ski models are listed on the set label or can be requested from K 2. REMARK: 9.2 - 2 This mounting instruction is valid for the MARKER / K 2 models MXCELL TCx QuikClik, MXC TCx QuikClik, MCX TCx light QuikClik, M3 TCX light QuikClik, ERC TCx light QuikClik, M3 QuikClik, ER3 QuikClik, M2 QuikClik, Free Ten Quikclik and ERP QuikClik. REMARK: ( 18.3) The binding models K 2 Quikclik GRIPWALK are designed for the following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " 9.2 - 3 INSTALLING THE TOE: * Open the locking lever and slide the toe from the center of the plate forward. (9.2 - 1 & 9.2 - 2) CAUTION ! Make sure that the toe spacer rails engage both sides of the base plate properly. * Slide the toe to the correct sole length in accordance with the front sole length scale. (9.2 - 3) 9.2 - 4 * Close the toe locking lever. (9.2 - 4) 69 9.2 INSTALLATION OF MARKER / K 2 SYSTEMS