9.3 INSTALLATION OF M2 / ERP GRIPWALK MODELS 9.3 - 1 IMPORTANT ! M2 / ERP bindings are designed to mount only in conjunction with K 2 M2 / ERP skis. The suitable ski models are listed on the set label or can be requested from K 2. REMARK: ( 18.3) The binding models M2 / ERP GRIPWALK are designed for the 9.3 - 2 following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " INSTALLING THE HEEL: * Slide the heel from the center of the plate backward until it stops. (9.3 - 1) CAUTION ! Make sure that the spacer rails engage both sides of the base plate properly. (9.3 - 2) 9.3 - 3 * Move the heel backwards by turning the forward pressure adjustment screw. (9.3 - 3) 9.3 - 4 INSTALLING THE TOE: * Ensure that the fixation screw tips do not exceed the bottom side of the spacer. * Slide the toe onto the plate, starting from the front. (9.3 - 4) CAUTION ! Make sure that the spacer rails engage both sides of the base plate properly. (9.3 - 4) 71 9.3 INSTALLATION OF MARKER / K 2 SYSTEMS