10.1 INSTALLATION OF MARKER / NORDICA FDT GRIPWALK MODELS 10.1 - 1 IMPORTANT ! Nordica FDT bindings are designed to mount only in conjunction with Nordica skis with premounted plate system. The suitable ski models are listed on the set label or can be requested from Nordica. REMARK: ( 18.3) 10.1 - 2 The binding models Xcell FDT, TPX FDT, TP2 light FDT, TP light FDT, TP2 Compact FDT, TP Compact FDT, TLT FDT and Free FDT GRIPWALK are designed for the following standard boot soles: * Alpine ski boots for adults ISO 5355 * Touring ski boots for adults ISO 9523 with the additional marking " Gripwalk® " INSTALLING THE TOE: * Open the locking lever and slide the toe piece from the front onto the plate. (10.1 - 1 & 10.1 - 2) REMARK: 10.1 - 3 When mounting the binding models on the FDT Demo / FDT RTL plate systems slide the toe piece from the center onto the plate. CAUTION ! Make sure that the toe spacer rails engage both sides of the base plate properly. 10.1 - 4 * Slide the toe to the correct sole length in accordance with the front sole length scale. (10.1 - 3) * Close the toe locking lever. (10.1 - 4) 73 10.1 INSTALLATION OF MARKER / NORDICA SYSTEMS