13.7 REPLACING SKI BRAKES 13.7 - 1 REPLACING THE SKI BRAKES 10.0 TP: DEMOUNT THE SKI BRAKE: * Remove the ski brake attachment screws (13.7 - 1). 13.7 - 2 * Pivot the rear brake platform hooks carefully to remove the ski brake (13.7 - 2). 13.7 - 3 INSTALL THE NEW SKI BRAKE: * Engage the front of the brake platform and feed the rear hooks into the notches of the spacer. Make sure that the new brake is locked in place (13.7 - 3 and 13.7 - 4). 13.7 - 4 * Tighten the attachment screws carefully by hand (13.7 - 5). IMPORTANT ! Tighten the screws by hand, do not use a power drill ! REMARK: 13.7 - 5 The wide ski brakes are replaceable in the same manner. see BRAKE CHART 18.2 90 13.7 REPLACING SKI BRAKES