The Journal of Explosives Engineering - May/June 2022 - 15

ISEE
WEBINAR
ISEE Blasters Training Webinar Series
Now Available On-Demand!
Blasters Training Webinar Series - Part 1
Approximately 4 hours - Cost $100
1-1 Fundamentals of Blast Design
by Joe Nawrocki, Senior Technical Manager, Dyno Nobel
Presentation sponsored by Tradestar
1-2 Importance of Communication Between Drillers and Blasters
by Seth Burns, ISG Manager, Nelson Brothers
Presentation sponsored by Montabert
1-3 Explosive Products: Properties and Application
by Alastair Torrance, Principal, Kilmorie Consulting Pty Ltd
Presentation sponsored by O-Pitblast
1-4 Preventing Flyrock Through Good Blast Design and Delay Timing
by Richard O'Meara, US Technical Services Director, Orica
Presentation sponsored by Lubrizol
Blasters Training Webinar Series - Part 2
Approximately 4 hours - Cost $100
2-1 Close In Construction Blasting
by Mike Koehler, President, B.E. Consultants, Inc.
2-2 Blaster's Math
by Bill Necker, Manager of Technical Services, Maurer & Scott
Presentation sponsored by GeoSonics/Vibra-Tech
2-3 Legal Advantages of Good Blast Reports/Recordkeeping
by Kelly Ratliff and Ralph Burnham, Attorneys, Reminger Co., LPA
Presentation sponsored by JM Miller, Inc.
2-4 Vibration Level One+
by Jeff Taylor, President, Sauls Seismic, LLC
Webinar Series Partners
Platinum Sponsors
Austin Powder, GeoSonics/Vibra-Tech, JM Miller, Lubrizol, Montabert, Tradestar, & Tread Corp.
Gold Sponsors
Silver Sponsors
IME and BME
Blasters Training Webinar Series - Part 3
Approximately 4 hours - Cost $100
3-1 Geology Level One+
by Kurt Oakes, Senior Manager - Drill & Blast, Peabody Energy
Presentation sponsored by Dyno Nobel
3-2 Flyrock
by Jay Elkin, Wampum Hardware
Presentation sponsored by Tread Corporation
3-3 Bulk Explosives Equipment and Use
by Mark Curry, Technical Services Manager, Orica
Presentation sponsored by O-Pitblast
3-4 Blasting Safety Level One+
by Maggie Hettinger, Senior Technical Engineer, BME USA
Blasters Training Webinar Series - Part 4
Approximately 4 hours - Cost $100
4-1 Public Relations
by Josh Hoffman, Director of Technical Services, IME
4-2 Preventing Block Movement/Misfires Through Good Blast Design and
Delay Timing
by Frank Lucca, President, Terra Dinamica LLC
4-3 Loading Bulk Blasting Agents and Quality Control on the Bench
by Evan Hagenlock, Product Manager, Bulk, Austin Powder Company
Presentation sponsored by Austin Powder Company
4-4 Transportation of Explosives
by Matt Spina, State Trooper, CT State Police
On-Demand Training Details
Each four-hour webinar is valid for one certificate of completion. If you have
previously taken the course and received a certificate, you will not earn another
one by taking the quiz again. If this webinar is being taken for retraining credit
hours, a 20-question quiz must be completed after watching the webinar in
its entirety. Users who score 75% or higher, and who submit a signed affidavit
stating the entire webinar was watched, will receive a certificate of completion.
Several states have approved to accept this training including: Alabama,
Colorado, Delaware, Hawaii, Indiana, Kansas, Kentucky, Maryland, Missouri,
Montana, New York, Ohio, Pennsylvania, Tennessee, Virginia, Washington, West
Virginia and Wyoming. Check ISEE's website for an up-to-date list of states.
Register online at www.isee.org
http://www.isee.org
The Journal of Explosives Engineering - May/June 2022

Table of Contents for the Digital Edition of The Journal of Explosives Engineering - May/June 2022
