WIRE MESH TRAY HOW TO CUT CABLOFIL CABLE TRAY * Always use side action angle bolt cutters. LENGTH COUPFIL WEIGHT INCHES MM LBS 24.8 630 6.0 KG/1 2.7 S S - NORMALLY STOCKED * Angle all cuts away from the new end. * Cut each wire with one clean cut, eliminating any grinding or touch-up. 5 6 3 2 4 * Cut the bottom wires first, in order as shown, from the underside of the tray. * Rest the lower jaw of the cutters against the cradle wire and cut at an angle away from the new end. 1 * Cut the side wires next, starting with the top wire. INSTALLATIONS * Make sure the finished cut is safe and ready for installation. A.58 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL