WIRE MESH TRAY USING A POWER CUTTER TO CUT CABLOFIL - CABLOCUT Small head size permits cuts close to welds Special shearing blade insures clean cuts without burrs Cutting blades are easy to replace Cablocut is the easiest way to cut and fabricate wire mesh tray. It ensures a perfect, clean cut in less than a second. The rechargeable Makita 18 V Lithium-ion battery makes up to 300 cuts between charges and will make Cablocut your favorite tool on your next installation. * Cuts steel or stainless wire mesh tray up to 6mm in diameter Soft grip, balanced design * Special shearing blade geometry prevents burrs and sharp edges * Quick stop motor and automatic retraction when cut is complete enhances safety * Hydraulic damping system reduces maintenance only required after 20,000 cuts * Multifunction LED for workplace illumination and battery charge indicator Multifunction LED for illumination and charge indicator * Uses standard Makita 18 V/1.5 Ah Lithium-ion battery * Ergonomic housing with soft grip handle ITEM DESCRIPTION S CABLOCUT* Cutter, Case, Spare Blades S CABLOCUT BLADES Spare Blades S CABLOCUT BATTERY* 18 V Li-Ion Battery 1.5/A/HR S CABLOCUT CHARGER* 120 VAC Quick Charger SHEARING ACTION RESULTS IN CLEAN EDGE. Cablocut Results Old Tools, Electric or Manual *Battery and Charger sold and shipped separately. S - NORMALLY STOCKED INSTALLATIONS ACCESSORIES CASE KK50L Rigid plastic case - room for cutter, battery and charger RAL1 BATTERY* CHARGER LGL1* 18 V / 1.5 Ah / Li-Ion 20 V Quick charger A.59 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL