WIRE MESH TRAY PROPER USE OF FAS TABS - WIRE MESH TRAY FAS tabs speed up installation times and because no additional attachment hardware is required, they also reduce costs. Follow these steps for proper installation: 1 2 Insert tray into slots 1 Slide tray under tabs 2 Place accessory onto tray Slide accessory under tabs 3 From the underside, depress several tabs using a screwdriver or pliers to secure tray 3 Depress all tabs using a screwdriver or pliers to secure tray HOW TO USE - FS41 1 2 Hook one side of the FS41 into channel support. Depress FS41 and hook other side into channel support. 3 Add an additional FS41 on the opposite side of the channel support for secure installation. PROPER GROUNDING FOR PAINTED TRAY - SWK 1 2 3 INSTALLATIONS Remove outer mask of folded copper strip (painted over) exposing the copper strip at each end of the tray. Position tray so that the exposed copper strips are aligned and use SWKs to join tray sections. Add another SWK to the bottom section over the copper strips for proper grounding. A.61 WWW.LEGRAND.US/CABLOFILhttp://WWW.LEGRAND.US/CABLOFIL